PROFITEC ADVANTUser’s Guide 3,5” HDD USB/E-SATA EnclosureMT5076
10ENStep 3. Choose the new drive (1) under [Disk Utilities] and click [Partition]. Click [Options] to choose format. Refer to [Figure 1]. Choose
11ENFigure 1: Choose the partition for your hard drive.Figure 2: Choose the format for your hard drive.Step 4. After the partition is over, an icon wi
12ENNote: This HDD enclosure is manufactured according to newest technology and specifi cation. Media-Tech is not responsible for lost data and damagin
2ENContentsPackage contents ...2Features...
3ENCompatibilityPC COMPATIBILITYMinimum demands: Intel processor 350 MHz, 64 MB RAMOS Compatibility: Windows 98 SE/ME/2000/XP/VistaUSB 1.1 / USB 2.0Ma
4EN4. Fix the HDD by tightening up the screws on the backside of mounting cave.5. Put back the lower cover and tighten up the screws.6. Put back the
5EN4. Press “Power” button on the front panel to turn on the external enclosure. You can also turn on fan for better cooling (press “Fan” button).FRO
6ENUnplugging the hardwareIf you are using eSATA interface do the following:All operating systems1. Make sure all the relative windows are closed and
7EN3. When the system pop-up [Confi rm device to be stopped], click [OK]. When the green icon disappears, unplug the USB cable from computer.Note: Do n
8ENHard disk partitioningWindows 2000/2003/XPNote: For a formatted Hard Drive, proceed to step 2.Step 1. Click the [Start] icon and then select [Setti
9ENStep 4. Input your partition space then click [Next]Step 5. Assign a drive letter for your new Hard drive, and click [Next].Step 6. Select the opti
Comentarios a estos manuales