Media-tech SCANLINE COMBO Manual de usuario descargar pdf

SCANLINE COMBO

Instructions Manual

PORTABLE AUTOFEEDING COLOR SCANNER FOR A4 DOCUMENTS

MT4093

Time and Date setting

1. Press [TIME SET] button once to enter time setting mode by using a thin,

blunt object, such as the end of a paperclip to access the button. The LCD

status display screen will show “1 ##” (step 1) for the year. “##” is a set of

number that would be changed to correspond to the actual time/date set-

ting. The numbers 1-5 in front of “##” indicates each step in the settings. Time

(2012.1.1~2050.12.31)

2. Press the [JPG/PDF] or [DPI] button to select the current Year.

3. Press the

button once to conﬁ rm setting.

4. Repeat step 2 and 3 to continue the Time and Date setting process

5. After setting the Minute, “5##”, press the [TIME SET] button again to complete

the Time and Date setting.

Formatting the micro SD memory card

1. Insert a new micro SD card into the scanner, and then turn on the scanner.

2. Press the format button into format mode. “F” will display on the LCD.

3. Press the

button once to format the micro SD card.

4. SD card indicator will blink until format is complete.

Setting the resolution

Press the [DPI] button to select High / Medium / Low resolution.

High/ Medium / Low resolution icon will be displayed on status LCD.

Setting the scan mode

Press the [JPEG/PDF] button to select JPEG/PDF mode.

JPEG/PDF icon will be displayed on status LCD.

How to ﬁ x the scanner

1. Put on the scanner

Slide the Fixed button from Lock towards Release, then put the scanner on the

docking by leaning the right side in ﬁ rst. Use USB cable and plug it to PC computer.

2. Take out the scanner

Slide the Fixed button from Lock towards Release, then take the scanner out

from the docking by raising the left side ﬁ rst.

For scanner with docking:

a. Adjust the Width Controller to an appropriate gear in accordance with the size

of the document.

b. Smooth the edge of the document before scanning

c. Aim the edge of the document at the slot of the scanner. (Align to the right

side of the slot.)

d. Softly insert the paper into the slot,then the scanning will start automatically.

e. Press the button to enter into USB mode, then you can view the scanned

ﬁ les on your computer screen.

Explanation of the status icons

Indicator

Setting

1## Year

2## Month

3## Day

Indicator

Setting

4## Hour

5## Minute

Part Function

1 1) For scanner without docking: Press and hold this key for 3 seconds to turn power on or oﬀ .

In power on mode, press this button to start scanning, press this button again to stop.

2) For scanner with docking: Press and hold this key for 3 seconds to turn power on or oﬀ .

In power on mode, scanning will start automatically when the scanning document is detected.

2 Color/Mono Select Color/Mono scan, Color/Mono mode icon will be displayed on status LCD

3 Format button Press this button to format the micro SD card.

4 LCD screen Scanning status display

5 Scan/Error LED indicator The Green LED indicates normal scanning, Red LED indicates abnormal scanning/overspeed.

6 Charge LED indicator When the Red LED keeps on, it indicates the battery is charging.

When the Red LED goes out, it indicates the battery has been fully charged.

7 DPI Low resolution

Middle resolution

High resolution

300dpi

600dpi

900dpi (w/o docking)

1200dpi (w/ docking)

High/ Medium /Low resolution mode icon will be displayed on status LCD

8 JPEG/PDF Select JPEG/PDF scan, JPEG/PDF mode icon will be displayed on status LCD

9 USB interface Connect to a computer via USB cable provided to view and transfer ﬁ les

10 Time Set Press to enter Time setting mode

11 Reset Press to reset the scanner (Hardware reset)

12 MicroSD card slot The micro SD card storage location

13 Fixed button Slide to put the scanner on the docking or take it out of the docking

14 Width controller Adjust to scan documents of diﬀ erent sizes

Using the scanner

Turn on/oﬀ the scanner

Turn on/oﬀ the scanner by pressing the button for 3 seconds.

Note: The scanner will power oﬀ automatically if no scanning action is detected

within 3 minutes.

Inserting a micro SD memory card (not included)

You must insert a micro SD Card (not supplied) to record and store your pictures.

Inserting the micro SD memory card:

1. Turn OFF the scanner.

2. Insert the micro SD card into the micro SD card slot, and gently press in until

the card is latched.

Note:

1. Do not force the card into the slot;

forcing may damage both the scan-

ner and the micro SD memory card.

Align the micro SD card position (as

marked) and try again

2. The micro SD memory card must be

formatted before scanning. See the

following instructions.

Item Function Description

1 File Format JPEG/PDF

2 SD card indicator pliki zostaną zapisane na karcie microSD

3 Battery indicator

Battery is full Empty battery

4 Scan Color COLOR/MONO

5 Counting

Indicator

Shows scanned ﬁ les in the microSD card

6 Scan resolution HI:900dpi (w/o docking)/1200dpi (w/docking)

MI:600dpi LO:300dpi

Key features

¯ Color/ Mono JPEG/PDF scan selection

¯ High/Medium/Low dpi scan selection

¯ Directly save JPEG/PDF ﬁ les to the micro SD card

¯ Support the micro SD&SDHC card up to 32GB

¯ Windows 7 / Vista / XP and Mac OS10.4 or above (directly plug-in, driver in-

stallation not required)

Functional parts

How to scan

For scanner without docking:

a. Turn on scanner by pressing the button for 3 seconds.

b. Hold the document ﬁ rmly with one hand on a ﬂ at surface.

c. Place the scanner on the edge of the paper to ensure the whole document

can be scanned. Make sure to keep the scanning area in between the scanning

width indicators marked on the side of the scanner.

d. Hold the scanner ﬂ at against the material and then press the button once.

Slide the scanner slowly, keeping your hand stable to get the best quality picture.

f. Press the button again to stop scanning.

1 2

SCANLINE COMBO 1

Indice de contenidos

Pagina 1 - SCANLINE COMBO

SCANLINE COMBOInstructions ManualPORTABLE AUTOFEEDING COLOR SCANNER FOR A4 DOCUMENTSMT4093ENTime and Date setting1. Press [TIME SET] button once to en

Pagina 2

ENNotes:1. Before scanning,make sure the micro SD card has been inserted properly and the scanner docking has been connected to external power.2. Onc

Comentarios a estos manuales

Sin comentarios

Media-tech SCANLINE COMBO Manual de usuario

Busca en linea o descarga Manual de usuario para Accesorios De Computador Media-tech SCANLINE COMBO. Media-Tech SCANLINE COMBO User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Accesorios De Computador Media-tech SCANLINE COMBO